LaytonRecruiter Since 2001
the smart solution for Layton jobs

Production Technician

Company: Janicki Inustries, Inc.
Location: Layton
Posted on: April 9, 2021

Job Description:

This position is a temporary role - up to three months with potential to hire after the temporary duration. We are recruiting individuals with open shift availability. POSITION DESCRIPTION The Production Technician performs a variety of duties and multiple uses of different skill sets in the production of high risk parts and tooling. Some skills include vacuum integrity, prepreg installation, infusion or wet lay composite fabrication and curing. Aerospace tool finishing and custom hardware fabrication and installation, as well as sealing and release applications are some additional daily tasks. Techs are required to follow directions carefully, have basic mechanical knowledge, manual dexterity, good eyesight and the ability to perform repetitive tasks. The Production Technician has three levels of competency to be determined by performance, certifications, and supervisor discretion:

  • Capable to Expert, based on Certifications within the Cell
  • Capable to Expert, based on Certifications within the Cell
  • Proficient with JI Certifications in one or more of the following; Metrology, Welding, or NC Programming Certifications may be Project or Customer specific. Level I - III Techs may have certifications in P-C-P, Duratec, Forklift, or Crane. The following essential job functions are performed as a Production Technician:
    • Attention to detail and quality is required
    • Reads and understands blue prints, isometric drawings and work orders
    • Receives and carries out directions from designated Supervisors and Production Leads
    • Must understand and comply with Safety and 5S
    • Must understand and comply with AS9100 and Nadcap Practices and Procedures as applicable
    • Must be able to read, understand and execute Work Orders to exacting specifications
    • Identifies and obtains equipment, tools and materials needed to properly perform job function
    • Set up scaffolding and safety barriers under direction
    • Properly executes Hazardous Material Disposal activities
    • Maintains the work area and equipment in a clean and orderly, FOD free condition
    • Knowledge and use of common hand tools
    • Performs on the job training for Project Certifications, AS9100, NADCAP training and other training as required
    • Works in other Cells to support Production as required, ie; Mill, Mold/Fab or Assembly Cells
    • Performs other duties as assigned
    • Package and crate parts for shipment, includes shrink wrapping
    • Must work well under pressure, meeting and completing multiple deadlines. The incumbent shall; at all times demonstrate cooperative behavior with colleagues and supervisors
    • Being at work on time and maintaining good attendance is a condition of employment and is an essential function of the job QUALIFICATIONS MUST BE U.S. CITIZEN OR LEGAL PERMANENT RESIDENT FOR THIS POSITION. Due to our ITAR and EAR regulations, applicants must be a US Citizen or of Legal Permanent Resident Status as defined by 8 U.S.C. 1324b(a)(3). EDUCATION/EXPERIENCE High School diploma or GED required, college level or trade school education preferred. One or more years of experience in related field may be substituted for education. Must have effective verbal and written communication skills in the English language. Experience in aircraft frame assembly/maintenance and/or painting would be a plus. ADDITIONAL JOB DUTIES Job duties may include one or more of the following:
      • Ability to adapt and learn Customer/Project specific Certifications to perform work in the Cell
      • Cuts and lays composite fabric and flow media to design specifications under supervision
      • Vacuum bagging in order to prepare parts for drop tests, de-bulking fabric and infusion
      • Assists with the mixing, application, and infusion of resins/catalysts
      • Performs tabbing operations to work order specifications
      • Performs bonding of honey comb core
      • Metrology, part leveling, fixturing, equipment handling, laser tracker, radar and targeting as well as Spatial Analyzer Operation (as a separate Certification)
      • Advanced Assembly Procedures, will include detailed substructure and hardware installation
      • Janicki Certified, Overhead Crane, Forklift and Manlift Operation (as separate Certifications)
      • Operation of Pneumatic and Power tools, drills, grinders, saws, impact drivers, sanders, scissors sharpener and other tools including Calibrated Digital scales and measuring devices
      • Perform aerospace tool finishing utilizing sanding, grinding of exacting tolerances on flat surfaces and compound curves as well as doing detailed patch/repairs on the same
      • Knowledge of epoxy resin and catalyst used in repairs and surface finishing
      • Preparation and spray application of Duratec and hybrid Duratec (as separate certification)
      • Spray application of Foam (as separate certification)
      • Prep and Application of Chop, Initial Putty Application, Vacuum Integrity Spray (as separate certifications)
      • Familiar with the use/cleaning of shop spray guns and equipment
      • Performs prescribed maintenance on machines and facilities as required WORKING CONDITIONS Must be able to sit, stand, or crouch down for extended periods. Must be able to climb ladders and work platforms. Exposed to noise, dust, dirt, and paint fumes. Must be able to work under hot and cold conditions. Personal protective equipment (PPE), safety glasses and respirator will be required. Must be comfortable working within confined spaces and at various heights. Janicki Industries is an Equal Opportunity Employer. Janicki Industries does not does not discriminate on the basis of race, color, religion, sex, national origin, sexual orientation, marital or familial status, physical or mental disability, genetic information, age, retaliation, veteran/military service status, or any other legally protected status. Applicants or employees wishing to view a copy of Janicki Industries' Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department at (360) 404-1997.

Keywords: Janicki Inustries, Inc., Layton , Production Technician, Professions , Layton, Utah

Click here to apply!

Didn't find what you're looking for? Search again!

I'm looking for
in category
within


Other Professions Jobs


Student Driver / CDL A / Layover & Detention Pay
Description: Student CDL-A DriverLooking to Get Your CDL or Just Graduated CRST can help We re proud to announce the largest team driver pay increase in CRST history Join us and earn up to 0.85 CPM.With an incredibly (more...)
Company: CRST EXPEDITED
Location: Salt Lake City
Posted on: 04/17/2021

Regional Company Drivers: Dry Van and Open Deck *New Pay Packages! *
Description: br br br Regional Company Drivers: Dry Van and Open Deck br br New Pay Packages br Call 877-590-7801 or Apply Online Below br br Great OTR and Regional driving jobs across the U.S. (more...)
Company: Meadow Lark Transportation
Location: Salt Lake City
Posted on: 04/17/2021

Class A CDL - Crude Oil Driver- Home Daily (Heber City, UT)
Description: Pilot Truck Driving Jobs br br Join Our Team. Your journey begins here. br br To speak to a recruiter, call 888 516-8249 br br At Pilot Flying J, our Team Members come first, and we are (more...)
Company: Pilot Flying J
Location: Heber City
Posted on: 04/17/2021


CDL Student Drivers & Recent Grads Driver! Weekly Home-time!
Description: br br Looking to Get Your CDL or Just Graduated CRST can help br We're proud to announce the largest team driver pay increase in CRST history Join us and earn up to 0.85 CPM. br With an incredibly (more...)
Company: CRST Expedited
Location: Roy
Posted on: 04/17/2021

Dedicated CDL-A Driver - OH to UT Route
Description: Terminals Locations: Sidney, OH - Louisville, KY - Danville, VA - Gaffney, SC - Fort Worth, TX Indianapolis, IN - Columbus, OH WITH THE HIGHEST PAY AND BEST BENEFITS IN THE INDUSTRY
Company: Continental Express Inc.
Location: Salt Lake City
Posted on: 04/17/2021

Tire Technician: Now Hiring!
Description: IMMEDIATE HIRE: Tire Technician-Tractor Technician:FULL-TIME - EXCEPTIONAL BENEFITSMultiple shifts available, with shift differential At Crete Carrier, we wouldn't get far without our mechanics and technicians. (more...)
Company: Crete Carrier Corporation
Location: Salt Lake City
Posted on: 04/17/2021

TV Installer/Technician
Description: DISH supports 135 In-Home Services facilities that deliver service solutions to customers in every zip code, across the entire country. The IHS organization encompasses thousands of talented and dedicated (more...)
Company: DISH
Location: Salt Lake City
Posted on: 04/17/2021

Class A CDL - Local Intermodal Truck Driver
Description: br br Truck drivers earn up to 75,000 per year and get home daily in this Local Intermodal CDL driver position. Intermodal truckers haul 95 no-touch freight containers - 60 drop-and-hook - in (more...)
Company: Schneider
Location: Salt Lake City
Posted on: 04/17/2021

OTR Company Drivers: Dry Van And Open Deck *New Pay Packages! *
Description: br br br OTR Company Drivers: Dry Van And Open Deck br br New Pay Packages br br Call 877-590-7801 or Apply Online Below br br Great OTR and Regional driving jobs across the U.S. (more...)
Company: Meadow Lark Transportation
Location: Salt Lake City
Posted on: 04/17/2021

CLASS A CDL OVER THE ROAD TRUCK DRIVERS
Description: br br CLASS A CDL OVER THE ROAD TRUCK DRIVERS br Looking for a forever home NOW HIRING CLASS A CDL OTR TRUCK DRIVERS br Magnum LTD pays 0.49- 0.52 CPM and up to 0.09 CPM monthly bonus with (more...)
Company: Magnum LTD
Location: Roy
Posted on: 04/17/2021

Log In or Create An Account

Get the latest Utah jobs by following @recnetUT on Twitter!

Layton RSS job feeds